x

Blog

The principle of "extended producer responsibility" and Directive (EU) 2019/904 of the EP and of the Council

The idea of ​​developing a European strategy for plastics and adopting a circular economy model has necessitated the creation of special legislation in the European Union to effectively reduce the environmental impact of the production and consumption of certain plastic products, in particular Directive (EU) 2019/904. The Directive has entered into force in the European Union on July 3, 2021. The introduction into the national legislation was carried out with the adoption of the Ordinance on reducing the impact of certain plastic products on the environment.

Nature of the principle

The "extended producer responsibility" principle is a set of measures to reduce the overall environmental impact of a product and introduces obligations and responsibilities for the producers throughout the life cycle of the product.

In general, this principle is reflected in the responsibility of producers and their financing of activities related to the prevention and reduction of waste generated in the production of their products, the development of reusable products and the development of re-use markets and the recycling of the generated waste.

European and national legislation

The general requirements for waste management in the EU are set out in the Waste Framework Directive (2008/98), which allows Member States to set up extended liability schemes. This Directive operates on the principle of "extended producer responsibility" (Article 8). The normative act at the national level is the Waste Management Law, adopted in 2012, and among the goals of the legislator was the transposition of the Waste Framework Directive (2008/98).

In 2018, Directive 2008/98 / EC was amended with the adoption of Directive (EU) 2018/851. It sets minimum requirements for extended producer responsibility schemes. This is necessary due to the different performance of the Member States in the operation of the extended producer responsibility schemes introduced so far. The Directive was to be introduced into the legislation of the EU countries by July 5, 2020. For this purpose, Bulgaria adopted a Law amending the Waste Management Law on  March 5, 2021.

From November 2021 Ordinance on reducing the impact of certain plastic products on the environment is also in force. The Ordinance introduces the requirements of Directive (EU) 2019/904 of the European Parliament and of the Council of June 5, 2019 regarding the reduction of the impact of certain plastic products on the environment.

Extended producer responsibility scheme and its implementation

With the latest changes a legal definition of the term 'extended producer responsibility scheme‘ is introduced, according to which an 'extended producer responsibility scheme' is a set of measures taken to ensure that producers of products bear financial responsibility or financial and operational responsibility for management. of waste as a stage of the product life cycle after its conversion into waste.

The extended producer responsibility scheme currently applies to six groups of widespread waste:

• packaging;

• end-of-life vehicles;

• obsolete electrical and electronic equipment;

• waste oils and oil products;

• unusable batteries and accumulators;

• obsolete tires.

The requirements to the producersof each of these groups of waste are determined by ordinances of the Council of Ministers, according to art. 13 of the Waste Management Act. The ordinances determine the conditions for the collection, transportation, storage, as well as for the separate collection, reuse, recycling, recovery and disposal of waste.

Introduction of new waste groups and obligations of producers with Directive (EU) 2019/904

The adoption of Directive (EU) 2019/904 introduced extended producer responsibility, which includes the "polluter pays" principle. Producers should cover the costs of cleaning up waste management, data collection, raising awareness of products such as food and beverage containers, bottles, cups, envelopes and wrappers, light shopping bags and tobacco products with filters.

Member States should introduce additional measures for extended producer responsibility for different types of plastic products.

Obligation to cover the costs related to awareness-raising measures, waste collection costs and the costs of cleaning up contamination with waste also arises for producers of single-use plastic products such as:

  • Food containers, i.e. receptacles such as boxes, with or without a cover, used to contain food which is intended for immediate consumption, either on-the-spot or take-away, is typically consumed from the receptacle, and is ready to be consumed without any further preparation, such as cooking, boiling or heating, including food containers used for fast food or other meal ready for immediate consumption, except beverage containers, plates and packets and wrappers containing food;
  • Packets and wrappers made from flexible material containing food that is intended for immediate consumption from the packet or wrapper without any further preparation;
  • Beverage containers with a capacity of up to three litres, i.e. receptacles used to contain liquid such as beverage bottles including their caps and lids and composite beverage packaging including their caps and lids, but not glass or metal beverage containers that have caps and lids made from plastic;
  • Cups for beverages, including their covers and lids;
  • Lightweight plastic carrier bags as defined in point 1c of Article 3 of Directive 94/62/EC.

Producers of the following plastic products must cover at least the costs of awareness-raising measures, the costs of cleaning up the contamination with waste arising from these products, and the costs of data collection and reporting:

  • Wet wipes, i.e. pre-wetted personal care and domestic wipes;
  • Balloons, except balloons for industrial or other professional uses and applications that are not distributed to consumers;
  • Tobacco products with filters and filters marketed for use in combination with tobacco products.

Regarding to tobacco products with filters and filters marketed for use in combination with tobacco products., Member States must ensure that producers also cover the costs of collecting waste from those products that are disposed of in public collection systems, including infrastructure and its operation, and for the subsequent transport and treatment of this waste.

Deadlines

In general, the deadlines for the application of extended producer responsibility measures in Directive (EU) 2019/904 are 31 December 2024.

With regard to extended producer responsibility schemes established before 4 July 2018 and in relation to tobacco products with filters and filters marketed for use in combination with tobacco products, the deadline for application is 5 January 2023.

Tsvetomira Vakeva

Turnaliev Law Firm